Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Ventura Owner’s Guide
We stock and install CGI-compatible driveway pavers and paver components across Ventura, with most replacements running $7,000 – $18,000 for a full driveway installation depending on square footage, existing base condition, and paver style. A partial repair or section replacement typically lands between $1,500 and $4,500. Homeowners usually discover a failed paver section the same way: a low spot forms after winter rain, a corner paver cracks under vehicle weight, or the sand jointing washes out and weeds start pushing through. The fix starts with identifying exactly which CGI paver profile you have, because the wrong replacement piece will never sit flush.
Key takeaways:
- CGI pavers in Ventura face two specific enemies: clay soil movement and salt air corrosion on edge restraints.
- We carry the most common CGI paver profiles on the truck for same-visit swaps; specialty profiles are ordered and typically arrive in 3 – 5 business days.
- Every job gets a written price before the first paver is lifted, per the Cedarwell Care Promise we hold at every Elmstead location.
Which CGI Models This Applies To
CGI manufactures paver systems in several profile families, and the compatibility gotcha we see most often in Ventura is this: the 60mm and 80mm pavers are not interchangeable on the same base, even when the top surface looks identical. If your driveway was built with the 80mm system for vehicle traffic, dropping in a 60mm paver from a patio line will create a lip that catches tires and cracks under load. Check the underside of a loose paver for the CGI stamp and thickness marking before buying replacements.
We work with OEM CGI pavers when the pattern and color match matters most, and we also stock a quality aftermarket equivalent for the three most common profiles we encounter in Midtown, the Ventura Keys, and the hillside neighborhoods. The aftermarket pieces match dimensional tolerances within 1mm, but color-blend range on older sun-faded pavers is where OEM wins. If your driveway is more than eight years old and has full southern exposure, we’ll recommend OEM to avoid a visible patchwork. Elmstead Remodeling Ventura is an independent service provider; we are not affiliated with CGI, but we specify and install their products regularly.
Styles & brands we work with
Signs Your CGI Driveway & Pavers Is Failing
- Paver rocking underfoot: This means the sand-setting bed has washed out beneath the paver, usually from a drainage path that sends water under the edge. Left alone, the rocking paver will crack at its corners within a season.
- Weeds in a straight line: When vegetation sprouts along a straight seam, that is almost always a failed edge restraint letting the border pavers drift apart. The joint sand has gone, and the paver has shifted.
- Settling in a low arc: In Ventura’s clay soil, winter saturation followed by summer drying causes the sub-base to compact unevenly. A low arc across a driveway usually means the gravel base was never compacted correctly under that section.
- Chipped edges at the driveway apron: The apron takes the most tire scrub, and once the chamfer wears off, chips spread fast. This is common on CGI pavers that are 10+ years old with heavy daily traffic.
- White mineral bloom on the surface: Efflorescence shows water is moving through the paver’s underside and evaporating at the surface. It is cosmetic at first, but it signals a drainage issue that shortens the base’s life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Ventura, full CGI driveway replacement runs $7,000 – $18,000, while section repairs of 100 – 400 square feet typically land between $1,500 and $4,500. What drives the spread: how much of the existing base can be salvaged, whether we are removing and hauling old pavers, paver profile and OEM versus aftermarket, and whether the job needs a new edge restraint or drain line. Driveway replacement work in the same footprint falls between $5,000 and $14,000 when we are working with concrete or mixed material transitions.
Every quote includes the paver material, delivery, base prep, installation labor, joint sand, compaction, and a full cleanup with a photo of the finished job before we leave. We write the price down before we start, and that number does not move once the crew is on site. Our 365-Day Done Right Promise covers the completed paver work; if a section settles or a paver cracks within the first year, we come back and make it right.
DIY or Call Us?
There are two or three things a Ventura homeowner can safely do before calling us: lift a rocking paver to check the thickness stamp, photograph the underside profile, and gently probe the sand joint with a screwdriver to see if it has washed out. That tells us a lot before we arrive.
What we do not recommend is pulling a section of driveway pavers to re-set them yourself. The reasons are specific, not theoretical. The base compaction on a failed section is almost always the real problem, and re-setting pavers on a wet clay sub-base without a plate compactor will fail again within months. You need the right gravel, the right geotextile, and a mechanical tamper, plus the edge restraint repair that is almost always the hidden culprit. If you are unsure what you are looking at, call us at (341) 218-4316 and describe what you see. We will tell you honestly whether it is worth a service visit.
FAQs
CGI driveway pavers in Ventura typically last 20 – 30 years when the base was compacted correctly and the edge restraints are intact. The pavers themselves rarely fail; what fails is what sits under them, especially in clay soil neighborhoods where drainage was never addressed. Call (341) 218-4316 for an exact assessment of your driveway’s condition.
Yes, most CGI paver driveways can be repaired section by section if the base under the failed area is re-compacted and the edge restraint is replaced at the same time. Full replacement only makes sense when more than 60% of the paver field has drifted, cracked, or settled. Call (341) 218-4316 for a free estimate and we will tell you which path fits your driveway.
A typical 100 – 400 square foot section repair takes one to two days in Ventura, including base work, re-setting the pavers, joint sand, and compaction. We coordinate quiet hours with your family’s schedule and clean up fully before we leave. Call (341) 218-4316 to schedule.
We stock the three most common CGI paver profiles on the truck and can often complete the swap on the first visit. Specialty profiles and colors are ordered and typically arrive in 3 – 5 business days in Ventura. We also stock compatible parts for KraftMaid, Cambria, and Silestone projects, since many of our remodel clients need multiple material touchpoints handled at once.
If your CGI driveway or paver section needs work, call us at (341) 218-4316 for a free estimate. We will put the price in writing before the first board moves.
Written by Graham Stein, Owner, Elmstead Remodeling Ventura at Elmstead Remodeling Ventura, serving Ventura and nearby areas.
