Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Ventura Owner's Guide
If you have an Oldcastle paver driveway or walkway in Ventura and a section has shifted, cracked, or settled, the fix usually comes down to resetting or replacing individual pavers and the base beneath them. For a full Oldcastle paver driveway, installed prices in Ventura run $7,000 to $18,000 depending on square footage, site prep, and the specific Oldcastle product line. Most localized repairs, where we re-grade a settled section and reset pavers, land between $500 and $2,500. Homeowners typically spot the problem after a winter rain: a low spot pools water, a paver edge catches a wheelbarrow, or a section rocks underfoot.
Which Oldcastle Models This Applies To
Oldcastle sells pavers through a range of lines, and the naming matters. The three you're most likely to have underfoot in Ventura are the Holland Stone, the tumbled Dublin or Coventry series, and the larger-format Plank pavers. Each has different joint widths, thicknesses, and chamfer profiles, and they don't swap cleanly. A Holland Stone is 60mm thick with a tight 1/8-inch joint, while a tumbled Dublin paver runs 70mm with a wider, sandier joint meant for a softer look. If you replace one with the other, the surface height changes and so does the way water moves across it.
To identify your paver, look at the edge. Holland stones have a sharp, modern edge. Dublin and Coventry have irregular, rounded edges and a surface that looks deliberately worn. Plank pavers are rectangular, often 4 by 8 inches or 6 by 12, with a modular look. Your original installer may have left extra pavers behind a shed or along a side yard; those extras are the fastest way to get an exact match. If you don't have them, we can cross-check what's currently available from Oldcastle's California distributors, since some color blends get renamed or retired.
As for OEM versus aftermarket: Oldcastle pavers are what they are. There isn't a meaningful "generic" version the way there is with appliance parts. The aftermarket conversation is really about base material and joint sand, where quality varies more than the paver itself. We stock polymeric sand from Gator and Techniseal because a properly locked joint is what keeps ants and weeds from establishing in Ventura's clay-heavy soil. Our team at Elmstead Remodeling Ventura also stocks a range of Oldcastle-compatible colors on the truck for common repairs, and we're an independent service provider, not a division of Oldcastle.
Styles & brands we work with
Signs Your Oldcastle Driveway & Pavers Is Failing
- Water pooling in a low spot after rain. This usually means the aggregate base has settled or washed out beneath that section. Ventura's winter rains expose this quickly, especially on slopes where water runs under the paver edge.
- One or more pavers rock when stepped on. The bedding sand layer has thinned or eroded. Left alone, the rocking paver grinds against its neighbors and chips the edges.
- Widening joints filled with weeds or ants. Polymeric sand has broken down or was never used. Once the joint opens, weed seeds and ant colonies move in fast, and they push pavers further apart.
- A sunken runner of pavers following a drainage line. This often traces back to a trench that was backfilled and compacted in a hurry. The fill settles, the pavers follow, and the "dip" collects water every year.
- Edge pavers shifting outward toward the lawn or curb. The edge restraint wasn't installed or has failed. Without a solid edge, the whole field can drift outward over a few seasons, especially along a Ventura driveway with any slope at all.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What's Included
For a complete paver driveway installation in Ventura, we quote $7,000 to $18,000. The spread comes down to three things: total square footage, how much of the existing base can be reused, and whether we need to re-grade for drainage. A typical two-car driveway around 600 square feet with a fresh compacted base and Holland Stone pavers usually lands in the $10,000 to $14,000 range on the coast side of Ventura.
For repairs, you're looking at $500 to $2,500 for most settled sections, edge failures, or paver replacements. What's included every time: written line-item pricing before any work starts, the specific paver product named on the quote, new compacted base where needed, fresh joint sand, and a clean-up that includes a photo of the finished area before the crew leaves. The 365-Day Done Right Promise covers the work: if a repaired section settles again within a year, we re-set it.
DIY or Call Us?
You can safely identify the problem: walk the driveway after rain, mark low spots with chalk, and check whether edge restraints are still buried or visible. What you shouldn't do is pop out more than one or two pavers without a plan for compaction. The base beneath a concrete paver driveway is engineered; if you dig into it and backfill loose material, you'll have a new low spot by the next winter. Re-screeding bedding sand and re-compacting the base takes a plate compactor and a string line, and getting the slope wrong means water heading toward the garage instead of away from it.
If the damage is more than a single cracked paver and a re-sand, give us a call at (341) 218-4316. We'll walk the site, name the fix, and put the price in writing before the first paver moves.
FAQs
Oldcastle concrete pavers in Ventura's climate typically last 25 to 40 years when installed over a properly compacted base with sound edge restraint. The pavers themselves rarely fail; what fails first in our coastal air is usually the base, the joint sand, or the edge, and those are repairable without replacing the entire driveway.
Most settled sections can be repaired by removing the affected pavers, re-grading and compacting the base, and resetting the same pavers. If the base was poorly built across the whole driveway, replacement is sometimes more honest than patching, and we'll tell you which one applies after a site visit. Call (341) 218-4316 and we'll come take a look.
A settled section repair typically takes one to two days in Ventura, including removal, base work, resetting, and joint sand. A full paver driveway installation runs five to eight days depending on access and square footage. We schedule quiet tool use around neighboring nap and school hours where the site allows it.
We stock a range of common Oldcastle colors and styles on the truck for repairs, and we source full installation quantities directly from Oldcastle's California distributors. We also carry the matching joint sand and edge restraints, so you're not coordinating material runs. Call (341) 218-4316 and we'll confirm whether your color is on hand or needs to be ordered.
Written by Graham Stein, Owner, Elmstead Remodeling Ventura at Elmstead Remodeling Ventura, serving Ventura and nearby areas.
