A Elmstead company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Cover Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Cover Driveway & Pavers: The Ventura Owner’s Guide

If your Cover driveway or paver surface has shifted, cracked, or started separating at the joints, we can match your existing pattern and install a replacement section that sits flush with the surrounding work. A full Cover-compatible paver driveway installation in Ventura typically runs $7,000 – $18,000 depending on square footage and the specific paver style, and most repairs we handle are completed in one to two days once materials are on site. Most Ventura homeowners notice the failure the same way: a paver rocks underfoot near the garage, a low spot gathers water after the morning marine layer burns off, or the sand between pavers keeps washing out toward the curb on the first real rain of the season.

Call (341) 218-4316

Which Cover Models This Applies To

Cover as a brand is used broadly across the driveway and paver category, which means the first step on any Ventura job is identifying the specific paver profile, thickness, and joint width rather than assuming every paver labeled “Cover” is interchangeable. Pavers come in thicknesses from 40mm to 80mm for driveways, and the wrong thickness is the most common compatibility gotcha we see, especially where a newer section was laid by a different contractor than the original install. We measure the existing paver depth, check the edge profile (beveled, square, or chamfered), and document the laying pattern before quoting anything. On the OEM versus aftermarket question: for driveway pavers, a quality aftermarket paver from the same concrete family will usually match well enough after a year of Ventura sun and rain, but if the original section is tinted or tumbled, we recommend sourcing as close to the original manufacturer’s color lot as possible. We also stock and work with pavers that sit beside KraftMaid, Cambria, and Silestone surfaces on properties where the driveway meets an outdoor kitchen or entry feature.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Cover Driveway & Pavers Is Failing

  • Rocking or shifting pavers near the garage apron. The base layer under the pavers has started to erode, usually because water is getting in at the edge or a joint has opened up. Left alone, the loose paver will crack under vehicle weight.
  • Sand washing out between joints after rain. The joint sand has broken down or was never properly compacted. Each rain carries more of it away, and the pavers start sitting edge-to-edge instead of cushioned apart.
  • Low spots that hold water for hours after rain. The base has settled unevenly, often near a downspout or where the driveway meets the street. In Ventura, the clay-heavy soil in neighborhoods like Midtown and College Area expands and contracts with wet winters, which speeds this up.
  • Cracks running across multiple pavers in a straight line. This usually points to a base failure below the paving, not a single bad paver. Replacing just the cracked pavers on top will not fix what is moving underneath them.
  • Edges pulling away from the border or curb. Without a solid edge restraint, the outer pavers drift outward under tire load. You will see a widening gap at the lawn line or along the street side on older Cover driveway installations in Ventura.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a full Cover-compatible paver driveway replacement in Ventura, plan on $7,000 – $18,000, with the range driven by square footage, paver thickness, whether we are reusing any of the existing base, and how much edge restraint and drainage correction the job needs. If the failure is limited to a section of the driveway, a repair typically runs from $800 to $3,000 depending on the area and what we find under the pavers once they are lifted. Every quote we write includes the base material, new joint sand, compactor time, and haul-away of the old pavers, all itemized on paper before any work starts. The written price you receive before we begin is the price you pay, and the completed work is covered by our 365-Day Done Right Promise.

DIY or Call Us?

What a Ventura homeowner can safely do is identify where water is pooling and keep the joints from drying out completely, but lifting and relaying driveway pavers is a different matter. The base under a paver driveway carries the weight of vehicles, and if it is not compacted in the right lifts with the right material, the new pavers will settle within a season and you will be back where you started. We have pulled up DIY repairs in the Ventura foothills where the pavers looked fine from the top but the base was loose fill and the whole section had to come out again. Our crew brings the compactor, the edge restraints, and the right base material on every paver job. If you would rather have it done once, call (341) 218-4316 and we will come measure and write it up.

FAQs

A remodeled family room with new windows and a window seat

Getting started with Elmstead in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local crew that works across Ventura and the towns around it, to the same written standard as every Elmstead location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · Written quotes before work starts response · free estimates
Call (341) 218-4316
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Elmstead Remodeling Ventura responds fast. No obligation.

By submitting this form, you agree to the terms of our Privacy Policy and authorize us to contact you by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch