Backsplash, Tile & Flooring in Ventura, CA

Backsplash, Tile & Flooring in Ventura, CA

Backsplash, tile, and flooring work in Ventura runs between $2,800 and $14,000 for most kitchens, with backsplash alone typically landing between $900 and $3,200 depending on tile choice and square footage. We install tile and flooring with the same care we bring to a full Kitchen Remodeling in Ventura project: drop cloths on the floors, a written price before the first tile is cut, and grout lines that line up because we took the time to get the layout right. If you’re planning a kitchen update in the Pierpont or Midtown area, call (341) 218-4316 and we’ll walk you through what makes sense for your space.

This page covers what we install, how we install it, what it costs, and how we protect your home while the work happens.

Key Takeaways

• Backsplash installation in Ventura averages $1,800 to $3,200; full kitchen tile and flooring work ranges $2,800 to $14,000.
• You get a written price before work starts, not an estimate that shifts after demolition.
• Every visit includes drop cloths, shoe covers, and a photo of the clean-up before the crew leaves.
• The 365-Day Done Right Promise covers every tile and flooring project we complete.
• We use Schluter waterproofing systems and other named-brand materials with verifiable warranties.

When You Need Backsplash, Tile & Flooring

Some kitchens need Full Kitchen Remodeling. Others need the room pulled together with a new backsplash, a tile surround, or flooring that holds up to kids, dogs, and daily mess. Here’s when Ventura homeowners call us for this kind of work.

• Your grout is failing or staining in the backsplash. Older kitchens near the beach in Ventura deal with humidity that works into porous grout. Cracked or discolored grout behind the range or sink is a sign the seal has broken down.
• Your kitchen floor shows wear from foot traffic and pets. Sheet vinyl from a 1990s build held up for a while, but scratches, chips, and peeling edges in the Midtown and East End neighborhoods tell us it’s time for a replacement that can take the daily abuse.
• You’re repainting cabinets and the old tile no longer matches. Swapping cabinet hardware and paint colors changes the room’s palette. A backsplash in neutral porcelain or a soft herringbone pulls the new tones together without a full tear-out.
• Your tile is cracked or loose in a high-moisture area. Behind the sink or the cooktop, water and steam take a toll. Loose tiles with hollow sound, cracked corners, or a spongy feel in the grout lines mean the substrate or adhesive has started to give.
• You’re preparing to sell and the kitchen reads as dated. Ventura buyers walk into kitchens with opinions already formed. A new backsplash and level flooring change the room’s first impression without a six-figure remodel commitment.
• You want a kitchen that’s easier to clean with children and pets in the house. Sealed porcelain tile and proper grout lines wipe down faster than painted drywall, and they don’t trap the same smells and allergens that carpet or older porous surfaces hold onto.

Our Backsplash, Tile & Flooring Process

Every project in Ventura follows the same sequence. We explain it here because you should know what to expect on days one, two, and wherever the project lands. No surprises, no guessing who’s walking through the door.

1. Walk-through and written price. We measure the backsplash, floor, or tile surround and note the surface condition. Before any work is scheduled, you receive a written price. That number is what the project costs unless you add scope later, which we’d re-price in writing.
2. Material selection with named brands. You pick the tile, grout color, and trim from options we can source and stand behind. We install Schluter waterproofing membranes and systems where moisture is a risk, and we’ll show you the brand name on the material before it goes in.
3. Surface preparation. Floors get leveled and checked for flatness. Backsplash areas get cleaned, repaired, and any loose drywall or damaged substrate is addressed. Prep matters more than installation on most jobs, and we don’t rush it.
4. Installation with the Cedarwell Care Promise in effect. Drop cloths go down on all walking paths. Shoe covers go on at the door. We use quiet tools during nap hours and school-work times where we can, and we clean pet-safe product choices into the job wherever an option exists. The crew asks before moving a table, a plant, or anything else in the work path.
5. Photo of the clean-up before we leave. When the tile work is done and the grout has cured, we photograph the cleaned job site and send it to you. The crew doesn’t leave until the floors are swept, the surfaces are wiped, and the room is usable.

Every tile and flooring project we complete falls under the same C.A.R.E. values we apply on any larger Kitchen Remodeling in Ventura job: clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work.

Backsplash, Tile & Flooring Pricing in Ventura

The honest answer: backsplash work in Ventura typically runs $900 to $3,200, and full kitchen flooring replacements land between $2,800 and $8,500. When tile extends to a shower surround or a larger wet area, the project range shifts to $5,000 to $14,000. Here’s a breakdown of what drives the numbers.

What Affects the Cost

• Tile material. Ceramic and porcelain run $4 to $12 per square foot installed. Handmade or specialty tile from Ventura’s design showrooms can push to $25 per square foot or more. Glass tile, natural stone, and large-format porcelain add labor and material costs.
• Square footage. Backsplash for a standard 30-square-foot kitchen wall lands in the lower end of the range. A floor spanning 150 to 400 square feet moves into the higher band. The more tile you buy, the more the material line grows, but installation labor per square foot drops slightly on larger floors.
• Subfloor or wall condition. If the existing floor is uneven, cracked, or rotting in spots near the sink or dishwasher, there’s prep work before the tile goes down. A level floor is not optional; we won’t install over a surface that will fail in two years.
• Layout complexity. Herringbone, diagonal, or offset patterns take longer than a straight stack. Decorative inlays, listello trim, and tile borders add cuts and waste. You should know that before committing to a pattern.
• Grout and waterproofing. Epoxy grout costs more than cement grout but resists staining far better behind a range top. Schluter waterproofing membranes add cost where moisture-heavy areas demand them, and we’d rather include that from the start than discover a leak pattern after the tile is in.
• Old flooring removal. Removing existing tile, glued-down vinyl, or multiple layers of old flooring adds labor and disposal fees. We don’t tile over failing surfaces.

Sample Project Pricing

Project Type	Typical Range in Ventura
Ceramic or porcelain backsplash (30 – 45 sq ft)	$900 – $2,200
Glass or handmade tile backsplash (30 – 45 sq ft)	$1,800 – $3,200
Kitchen floor tile (100 – 200 sq ft)	$2,800 – $5,500
Kitchen floor + backsplash (combined)	$4,200 – $8,500
Full tile surround or larger wet-area project	$5,000 – $14,000

These ranges reflect what we see across Ventura neighborhoods, from the older homes in Midtown to newer builds east of Victoria Avenue. The exact price comes with the written estimate, which is free and specific to your kitchen. Call (341) 218-4316 and we’ll get it to you before any work is scheduled.

Why the Written Price Matters

Tile and flooring jobs have a reputation for price creep. The contractor starts with a low number, the demo reveals something underneath, and suddenly the final invoice looks different from the first conversation. We don’t work that way. You get a written price before the first tile is cut, and the 365-Day Done Right Promise backs the finished work. If something is not done right within a year of completion, we make it right. That promise applies to this sub-service exactly as it does to our full Kitchen Remodeling in Ventura projects.

Materials We Install

We install tile and flooring systems from manufacturers that carry their own warranties. When we use a Schluter waterproofing system under tile in a wet area, the Schluter warranty travels with the finished installation. That’s a protection the family can verify independently, and it means the work isn’t dependent on a single installer’s word.

Our material partners for tile and flooring work include Grohe for fixtures and Schluter for waterproofing and uncoupling membranes. We’ll also discuss Sterling and Toto products where they fit the project. These are names you can research before you commit, and we’re glad to show the packaging before installation so you know exactly what’s going in.

How We Protect Your Home During Tile & Flooring Work

Tile work is dusty. That’s not a secret in this trade. What changes is what the crew does about it. Here’s what happens on every Elmstead job in Ventura.

• Drop cloths on every walking path. Entry to kitchen, path to the tile saw, and around the work area. The floors outside the work zone stay covered, not just the patch being tiled.
• Shoe covers at the door. Every technician wears them inside the house, even on the first visit for measurements. If the crew steps outside, covers go back on before re-entering.
• Quiet tools where possible. Tile cutting still has to happen, but we schedule it around family rest hours. If a baby naps at 1:00, the saw runs before or after.
• Pet-safe product choices. Where a low-VOC or pet-safe adhesive, grout, or sealant option exists, we use it. We’ll tell you what’s going in and what it means for the air in the house while the work cures.
• A photo of the clean-up. Before the crew packs up, we take a photo of the swept floors, wiped surfaces, and the finished installation. That photo comes to you as proof the job site was left right.

These protections are not line items you pay extra for. They’re included on every visit, every time. That’s the Cedarwell Care Promise at work, and Graham Stein holds every crew member to it on every job.

Tile Types We Install in Ventura Kitchens

The climate here shapes what works and what doesn’t. Coastal humidity from the Pacific influences grout drying, adhesive choice, and material selection. Tile that handles a dry inland kitchen may not be the right choice four blocks from the beach. Here’s what we install most often and why.

Porcelain Tile

Porcelain is dense, absorbs very little water, and resists scratching from pet nails and chair legs. It’s the most common floor tile we install in Ventura kitchens because it handles the occasional wet paw print, spilled water bowl, and the sand that tracks in from the beach without failing. Porcelain backsplash tile works well too, particularly in matte finishes that don’t show water spots.

Ceramic Tile

Lighter than porcelain, a little easier to cut, and available in more glazed colors. Ceramic is a good backsplash choice for families who want pattern and color without the premium cost of hand-fired or glass tile. It needs sealing in high-splash zones, and the grout lines should be sealed regardless.

Glass Tile

Glass reflects light, making smaller Ventura kitchens near the coast feel brighter without adding a window. Glass backsplash tile cleans easily and doesn’t absorb cooking oils the way porous stone does. Installation requires more care, because the adhesive shows through the tile if it’s not applied evenly. We’d rather spend the extra hour getting that right than ship a backsplash with visible trowel lines.

Natural Stone

Travertine, slate, and marble look beautiful and need regular sealing. A stone floor in a kitchen with dogs and kids takes more upkeep than porcelain. We’re honest about that trade-off before you buy. If you love the look, we’ll install it, but we’ll also tell you what the maintenance calendar actually looks like.

Large-Format Tile

Fewer grout lines, a more open look, and a modern feel. Large-format panels (24×48 inches and up) have become popular in newer Ventura kitchens, especially east of Victoria Avenue where the footprint is bigger. These installs require a flatter substrate, and we won’t skip the prep. A 1/16-inch deviation across a large panel telegraphs through the finished surface.

FAQs – Backsplash, Tile & Flooring

How much does a kitchen backsplash cost in Ventura?

A kitchen backsplash in Ventura typically costs between $900 and $3,200, with most ceramic or porcelain jobs landing around $1,500 to $2,200. Glass and handmade tile run higher because both material and installation labor increase. Call (341) 218-4316 for a free written estimate specific to your kitchen’s dimensions and material choice.

How long does tile and flooring work take?

Most backsplash projects take one to two days, while Cabinets & Countertops with flooring and backsplash runs three to five days including removal, prep, installation, and grout curing. Drying times depend on adhesive, grout type, and Ventura’s coastal humidity. We’ll give you a day-by-day schedule in the written proposal before work starts.

Is it cheaper to repair grout or replace the tile?

Grout repair or replacement typically costs $300 to $700 per project, while full tile replacement starts around $900 for a small backsplash. If the underlying substrate is failing or the tiles are cracked or loose, grout repair is a temporary fix and the real fix is re-tiling. We’ll tell you which situation you have before you spend money on a repair that won’t last.

Can you install tile over existing flooring?

In most cases we don’t recommend tiling over existing flooring. The existing surface must be examined for flatness, adhesion, and moisture, and failing layers underneath will affect the new tile’s performance. We remove old flooring, prepare the substrate, and install over a surface that will actually hold. Schluter uncoupling membranes are part of that prep where movement or moisture is a concern.

Are your tile and flooring materials safe for children and pets?

We choose pet-safe and low-VOC products wherever an option exists, and we’ll name the adhesive, grout, and sealant brands before installation. During the job, the crew uses drop cloths, shoe covers, and quiet tools during nap hours. After the job, sealed porcelain and ceramic tile surfaces are among the easiest kitchen surfaces to keep clean with kids and animals in the house.

Why Families in Ventura Choose Elmstead Remodeling for Tile & Flooring

The crews are background-checked and uniformed, so you know who’s walking through the door. The phone is answered by a live person, 24/7, not a voicemail box or a callback queue. The written price is given before any work starts, on every project, including backsplash and flooring. And the 365-Day Done Right Promise means the work isn’t finished when the crew leaves: it’s finished when it holds up.

We’re a Cedarwell company. Every project, from Cabinet Installation & Refacing to a whole-home remodel, is governed by the Cedarwell Care Promise. The drop cloths, the shoe covers, the photo of the clean-up, the quiet tools, the pet-safe choices: these are not add-ons. They’re the way every job works.

If you’re planning our Kitchen Remodeling services or need tile and flooring work in Ventura, call (341) 218-4316. We’ll set up a walk-through, get you a written price, and answer any questions you have about materials, timelines, or how the work will affect your family’s daily routine while it’s happening.

Written by Graham Stein, Owner at Elmstead Remodeling Ventura, serving Ventura.