A Elmstead company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Owens Corning Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Driveway & Pavers: The Ventura Owner’s Guide

If you have an Owens Corning driveway or paver system that is cracking, settling, or separating, we can match the replacement materials and install them properly in Ventura. Paver driveway installation in Ventura typically runs $7,000 to $18,000 depending on square footage, site prep, and the specific Owens Corning paver line. Most owners discover a problem the day they notice a paver rocking underfoot, a low spot holding water after rain, or a crack that has widened past the point where sand alone will hide it. Graham Stein has seen enough of these failures in Ventura to know that the fix usually starts with identifying which Owens Corning product line was originally installed, because not every paver is interchangeable.

Call (341) 218-4316

Which Owens Corning Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Owens Corning’s paver lines are not as widely known as their roofing products, so compatibility starts with the installation paperwork or a leftover paver. The company’s paver offerings have changed over the years, and some Ventura homes built or hardscaped in the early 2000s used Owens Corning paver systems that are no longer in active production. When the original line is discontinued, the practical fix is matching a current Owens Corning-compatible paver by dimension, color tone, and surface texture rather than chasing an exact product code that no longer exists.

We also stock and work with parts and materials from KraftMaid, Cambria, and Silestone for interior projects, but this page is about driveways and pavers. The key Owens Corning compatibility gotcha is thickness: some of their paver lines run 60mm, others 80mm, and a thinner paver set into a bed graded for a thicker one will fail at the edges within the first Ventura rainy season. We measure before we order, every time.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Owens Corning Driveway & Pavers Are Failing

  • Rocking or shifting pavers underfoot. This usually means the bedding sand has washed out or compacted unevenly beneath the paver, often because a joint was left open too long. In Ventura, the winter rains accelerate this once water finds a path under the surface.
  • Low spots or standing water. A paver driveway that holds water for more than 30 minutes after rain has lost its slope or its base has settled. Water pooling against the garage slab is the most common complaint we hear from families in the Midtown district.
  • Edge pavers separating from the border. The edge restraint is failing or was never installed correctly. Without a solid edge, the entire field shifts outward, usually starting at the driveway apron near the street.
  • Faded or chalky surface with sand loss between joints. The joint sand has eroded and the pavers are beginning to abrade one another. Left alone, this becomes a structural problem, not just a cosmetic one.
  • Cracks running through multiple pavers in a line. That is a base failure underneath, not a single broken paver. Replacing only the cracked pieces will not hold in Ventura’s expansive clay soils if the base was underbuilt originally.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled staircase with wood treads and a slim metal railing

Paver driveway installation in Ventura runs $7,000 to $18,000 depending on the square footage, the condition of the existing base, and whether we are reusing any of the original Owens Corning pavers. A smaller paver patio runs $3,500 to $11,000. If the base is still sound, we can sometimes lift, regrade, and reset the original pavers for less than a full replacement, but that depends entirely on what we find underneath once the first pavers come up.

Every quote from Elmstead Remodeling Ventura includes the written line-item price before any work starts. You will see the paver count, the base material, the labor, and the disposal in writing. The 365-Day Done Right Promise applies to the finished paver work: if something is not right after the job is complete, we make it right.

DIY or Call Us?

You can inspect your pavers safely. Look for the signs above, measure the paver thickness with a ruler at an exposed edge, and take photos of the pattern before anyone moves anything. What you should not do is pull up a failed paver section and start rebuilding it without checking the base material underneath. Pavers are heavy, the base work is unforgiving, and a wrong guess about the subgrade in Ventura means doing the job twice. The same goes for cutting concrete-adjacent edges: it requires the right saw and the right eye for drainage. If you want us to look at it, call (341) 218-4316 and we will walk the driveway with you.

FAQs

An open living space after a whole-home remodel

Getting started with Elmstead in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local crew that works across Ventura and the towns around it, to the same written standard as every Elmstead location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · Written quotes before work starts response · free estimates
Call (341) 218-4316
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Elmstead Remodeling Ventura responds fast. No obligation.

By submitting this form, you agree to the terms of our Privacy Policy and authorize us to contact you by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch